One meter probe wire standard. $5.00 each additional meter to 10 meters.
The measured temperature is sent directly in °C or °F by a simple text protocol. The sensor sends the measured value according to a specific ASCII question-answer protocol.
The thermal sensor uses an element with an accuracy of ± 0.5°C for temperature measuring. A red LED indicates that temperature measuring is in progress.
+ Range of measured temperature
|-40°C to +85°C (-40 °F to +185 °F)|
|+ Measurement accuracy||+/- 0.5 °C|
|+ Measuring speed||Respond to query within 1000ms at maximum|
|+ Measuring element||Semiconductor|
|+ Data format||ASCII, described in specification|
|+ Communication parameters||2400 8N1|
|+ Connector||DB9F - Female (connected to PC directly)|
|+ Communication line||RS-232 (RxD, TxD, GND, DTR, RTS)|
|+ Status indication||Red indicator blinks at every reading, lights continuously at startup prior to first read.|
|+ Turning on thermometer||Setting DTR and RTS to 'On' value|